OSHA Construction Lockout Tagout

This course is targeted to employees in the construction industry that work around energized machines or equipment, and the standards for Lockout Tagout.

Beginner, Intermediate, and Advanced
English
Course Length: 1.5 Hours

What you'll learn

  • Introduction to Construction Industry Lockout/Tagout Safety Training
  • Lockout or Tagout?
  • LOTO Procedural Elements
  • Typical Minimal Lockout Procedures for Employers (Appendix A)
  • Introduction to the Selection and Use of Safety Practices Related to Electricity
  • Other Conductivity Precautions
  • More Safety-Related Work Practices for Construction

Course Description

This course is targeted to employees in the construction industry that work around energized machines or equipment, and will also cover a related, general industry standard: 29 CFR 1910.147 the Control of Hazardous Energy or Lockout Tagout. This Construction Lockout Tagging of Circuits course describes hazard identification, avoidance, and control, along with practical information on safe work practices.

The online OSHA construction lockout tagging of circuits training course consists of content, graphics, audio, non-scored quiz questions, and a final exam.

Course Outline

OSHA Construction Lockout Tagout Course Outline

About this course

Introduction to Construction Industry Lockout/Tagout Safety Training

  • What Does the LOTO Standard Apply To?
  • Exceptions
  • An Established Lockout/Tagout Program
  • Key Terms

Lockout or Tagout?

  • Employer’s Energy Control Program
  • Energy Control Procedures
  • Protective Materials and Hardware
  • Employee Training
  • Limitations of Tags
  • Employee Retraining
  • Periodic Inspections

LOTO Procedural Elements

  • Release of Stored Energy
  • Lockout or Tagout Device Removal
  • Outside Personnel
  • Group Lockout or Tagout

Typical Minimal Lockout Procedures for Employers (Appendix A)

Introduction to the Selection and Use of Safety Practices Related to Electricity

  • Working with De-Energized Parts
  • Working with Energized Parts
  • Lockout and Tagging
  • De-Energizing Equipment
  • Application of Locks and Tags
  • Verification of De-Energized Condition
  • Reenergizing Equipment
  • Unqualified Persons
  • Qualified Persons

Other Conductivity Precautions

  • Conductive Materials and Equipment
  • De-energizing Transmission and Distribution Lines

More Safety-Related Work Practices for Construction

Summary

Additional information

Final Exam

Frequently Asked Questions

Who must take this training?

All authorized and affected construction workers whose work operations are or may be in, an area where energy control procedures may be utilized are required to take this course.

How often is retraining or recertification required?

OSHA 29 CFR 1910.147(c)(7)(iii)(A-C) states:

Retraining shall be provided for all authorized and affected employees whenever there is a change in their job assignments, a change in machines, equipment or processes that present a new hazard, or when there is a change in the energy control procedures.

Additional retraining shall also be conducted whenever a periodic inspection under paragraph (c)(6) of this section reveals, or whenever the employer has reason to believe that there are deviations from or inadequacies in the employee’s knowledge or use of the energy control procedures.

The retraining shall reestablish employee proficiency and introduce new or revised control methods and procedures, as necessary.

What are the governing regulations?

This online course satisfies the training requirements for OSHA 29 CFR § 1926.417 Construction Lockout Tagging of Circuits as well as topics covered in OSHA 29 CFR § 1910.147 The control of hazardous energy, lockout tagout, that are appropriate for the construction industry.

Navigation Strategies

Beginners: Complete the course in order from beginning to end. Once any topic is completed, you will have full access to it at any time for one year after registration, to use as a resource.

Intermediate/Advanced Users: Use the course as a flexible resource tool to find what you need, whenever you need it. Try the assessment tests first, if you get 80%+ you can move to the next level, if you get less than 80% you should complete the lecture. This gives you a pre and post-assessment score, which can be used to track your skills improvements.

Ready to
GeT Started Today!

$14.99 / month or $180 / year

Includes all access to the Global eTraining
‘GeT Everything’ course library.
(see all courses)

OR

Start Your Free Trial

Training 5 or more people?

Give your team All Access to the
entire Global eTraining ‘GeT Everything’
course library.

Buy For My Team

This course includes:

  • Upon successful completion, learners will obtain a GeT certification of completion indicating Hours / CEU / CME.

PLUS!

  • Full access to the entire Global eTraining ‘GeT Everything’ course library

'GeT Everything' For One Low Price!

All Courses for $14.99 per month or $180 annually

Start Your Free Trial Today!

Fill out the form below to access your free 7-Day trial of the ‘GeT Everything’ library.

  • Global eTraining uses the contact information you provide to us to contact you about our products and services. You may unsubscribe from these communications at anytime. For information on our privacy practices and commitment to protecting your privacy, check out our Privacy Policy